PerTronix JBA Exhaust 40-2537 - Manual (Page 2)

PerTronix© thanks you for choosing JBA Exhaust, the best fitting, highest quality Exhasut
on the market. In order to realize the full potential of our good fit, please read and under-
stand these instructions completely prior to starting work.
Check to make sure you received the proper parts for your application. If you are unsure you
have received the proper parts call before you start work.
NOTE: Installation of this product requires an adequate workspace, general mechanic’s tools,
general mechanical “know-how” and a reasonable degree of experience. Most auto enthusiasts
with these resources will have little difficulty installing these headers. However, you should
carefully read these instructions before attempting to install this exhaust. If in doubt, consult a
professional mechanic. (Better to do it now than to get stuck halfway through the installation.)
By installing your JBA Performance Exhaust product, you indicate that you have read this docu-
ment and agree with the following terms.
The Purchaser is responsible for following all installation instructions and safety guidelines sup-
plied with JBA Performance Exhaust products.
PerTronix© assumes no responsibility for damages resulting from improper operation, misuse,
abuse, or lack of responsible care, or any problems resulting from incompatibility with other
manufacturer’s products.
Included with your installation instructions is a copy of the product warranty. Please read it care-
fully before you begin any work on your vehicle.
Be sure to work safe! Whenever you work under the vehicle be sure that it is located on level,
solid ground and is supported by adequate safety stands! Remember: Hot asphalt will not sup-
port most jack stands!
Many factors affect the installation of exhaust, some of which are broken or aftermarket motor
mounts, accidents that impact the configuration of the frame, and/or the installation of different
engines or aftermarket cylinder heads.