Focusing, Vibration reduction mode – Nikon 70-200mm-f-28G-ED-IF-AF-S-VR-Zoom-Nikko User Manual

Page 16

Advertising
background image

Lens’ focus mode

Cameras

M/A

M

Autofocus with manual

Manual focus

priority

(Focus assist is available.)

Manual focus
(Focus assist is available.)

Other Nikon AF cameras

Manual focus

(except the F3AF, F-601/N6006

*

)

(Focus assist is available.)

16

Focusing

Set your camera’s focus mode selector according to this chart:

C

S

AF

M

M

C

S

AF

F6, F5, F4-Series, F100, F90X/N90s*,
F90-Series/N90

*

, F80-Series/

N80-Series

*

, F75-Series/

N75-Series

*

, F70-Series/N70

*

,

F65-Series/N65-Series

*

,

Pronea 600i/6i

*

, Pronea S, D2-Series,

D1-Series, D200, D100, D70-Series, D50

* Sold exclusively in the U.S.A.

Autofocus with manual override (M/A mode)
1 Set the focus mode switch to M/A. (Fig. D)
2 Autofocus is provided, but you can manually override the focus by operating the

separate focus ring while lightly depressing the shutter release button or AF start
(AF-ON) button on the camera body of cameras so equipped.

3 To cancel manual override, remove your finger from the shutter release button or the

AF start button.

To limit the range of autofocus (with M/A mode compatible cameras only)
With AF operation, if the subject is always more than 2.5m (8.2 ft.) away, set the
focusing limit switch to “

∞–2.5m” to reduce focusing time. If the subject is 2.5m (8.2 ft.)

or closer, set it to “FULL” (Fig. E).

Focus lock (with M/A mode compatible cameras only)
With autofocus operation, focus is locked while pressing the focus lock button. (Fig. C)

・The AF-Lock function can be engaged on either the camera and lens. Focus is locked while

either of these buttons is pressed.

Vibration reduction mode

The following cameras are usable:
35mm SLR cameras: F6, F5, F100, F80-Series/N80-Series, F75-Series/N75-Series,
F65-Series/N65-Series
Digital SLR cameras: D2-Series, D1-Series, D200, D100, D70-Series, D50

・When using the lens with cameras other than those listed above, set the vibration reduction

mode switch to OFF to cancel the vibration reduction mode. With the Pronea 600i/6i
camera, in particular, battery power may become depleted quickly if this switch is left ON.

Camera’s focus mode

En

Advertising