Nikon D90 - Manual (Page 169)

149
Q
Connecting the Camera
Connect the camera using the supplied UC-E4 USB cable.
1
Turn the camera off.
2
Turn the computer on.
Turn the computer on and wait for it to start up.
3
Connect the USB cable.
Connect the USB cable as shown. Do not use force or attempt to insert the
connectors at an angle.
D USB Hubs
Connect the camera directly to the computer; do not connect the cable via a USB hub or
keyboard.
4
Turn the camera on.
5
Transfer photographs.
Nikon Transfer will start automatically; click the Start Transfer button to
transfer photographs (for more information on using Nikon Transfer, select
Nikon Transfer help from the Nikon Transfer Help menu).
6
Turn the camera off and disconnect the USB cable when transfer ends.
Nikon Transfer will close automatically when transfer is complete.
Power switch