Nikon D2HS - Manual (Page 203)

189
Menu Guide—Custom Settings
Option Description
Rear
control
panel
Controls whether rear control panel shows sen-
sitivity (ISO equivalency) or number of exposures
remaining. Press multi selector up or down to
highlight option, press to right to select:
• ISO (default): Rear panel shows sensitivity.
• Exposures remaining: Rear panel shows
number of exposures remaining. Sensitivity
displayed only while ISO button is pressed.
Viewfi nder
display
Controls whether viewfi nder shows frame count
or number of exposures remaining (note that
regardless of option selected, number of frames
that can be stored in memory buffer will be
shown while shutter-release button is pressed).
Press multi selector up or down to highlight op-
tion, press to right to select:
• Frame count (default): Viewfi nder shows frame count.
• Exposures remaining: Viewfi nder shows number of exposures re-
maining.
Custom Setting d6: LCD Illumination
This option controls the control panel backlights
(LCD illuminators). Highlight d6 Illumination in
the second level of the CSM menu (
170) and
press the multi selector to the right. Press the
multi selector up or down to highlight an option,
then press to the right to make a selection.
Option Description
Any button
Lamp on switch
(default)
Control panels illuminate only while power switch is rotated to
position.
Control panels illuminate whenever exposure meters are active
(note that this increases drain on battery).