Nikon D2HS - Manual (Page 78)

64
Taking Photographs—White Balance
Copying White Balance from d-0 to Presets d-1 – d-4
To copy a measured value for white balance
from d-0 to any of the other presets (d-1 – d-4),
highlight the destination preset in the thumbnail
display and press the center of the multi selector
as described in steps 1–3 on page 61. The menu
shown at right will be displayed.
1 Press the multi selector up or down to high-
light Copy d-0.
Nikon Capture 4
Nikon Capture 4 version 4.2.1 or later (available via download to purchasers of Nikon
Capture 4) can be used to edit white balance when RAW photographs taken with
the D2Hs are displayed on a computer. The edited value can be copied directly to a
white balance preset while the camera is connected to a computer, or the image can
be saved to the camera memory card and the white balance value copied using the
Select image option in the preset menu. Any comments created with Nikon Capture
4 will also be copied to the comment for the selected preset. See the Nikon Capture
4 manual for details.
2 Press the multi selector to the right to copy
white balance from d-0 to the selected preset
and return to the thumbnail display. If com-
ment has been created for d-0, the comment
will be copied to the comment for the selected
preset.