Nikon D2HS - Manual (Page 238)

224
Connections—Connecting to a Computer
Connecting the USB Cable
1 Turn the computer on and wait for it to start up.
2 Turn the camera off.
3 Connect the UC-E4 USB cable as shown. Connect the camera directly to
the computer; do not connect the cable via a USB hub or keyboard.
C S CL
A/V OUT
DC IN
C IN
4 Turn the camera on. If Mass Storage is
selected for USB, will be displayed in
the rear control panel and viewfi nder. The
aperture display in the top control panel will
also show
, and the PC mode indicator will
fl ash (if PTP is selected, the camera displays
will only change when Nikon Capture 4 Cam-
era Control is running). Photographs can be
transferred to the computer as described in
the PictureProject Reference Manual (on CD).
If Nikon Cap ture 4 Camera Control is run ning,
the top control panel will show
in place
of the number of exposures remaining. Any
photographs taken will be re
cord ed to the
com put er hard disk rath er than the cam era mem o ry card. See the Nikon
Cap ture 4 User’s Man u al for more in for ma tion.
Do Not Turn the Camera Off
Do not turn the camera off while transfer is in progress.