Nikon P3 - Manual (Page 119)

117
Wi
rel
e
ss Tran
sfer M
o
d
e
Wireless Printing Profiles
Whether a printer is connected to the computer or not, after configuring a profile, two profiles (one
for the computer and one for the printer) are created in the camera. If wireless printing is not need-
ed, the profile for the printer can be deleted. Connect the camera and computer via a USB cable,
start the Setup Utility and then delete the profile for the printer (P.120).
8 Configure wireless printing.
If a printer is connected to the computer, select the
printer to be used for wireless printing (P.130), enter
a printer profile name and select a printer icon.
• When selecting Create Infrastructure (Access
Point) and Ad-hoc (Camera to Computer) net-
work profile, the Setup Utility automatically
returns to the screen in step 5 without configuring
a printer, and a new ad-hoc network is set up in
the computer. After this network profile is set up,
wireless printing is configured.
• For Macintosh, click Select Printer… in the Get Started tab of the Setup Utility
and select a printer. After this, you can select printer settings such as paper type
and print quality.
• If no printers are connected to the computer, click Next without selecting a printer.