Nikon P3 - Manual (Page 66)

64
T
V
, Co
m
p
ut
e
r or
P
rint
e
r Con
ne
ct
ion
Selecting a USB Option for Connection to a Computer
Rotate the mode dial to a and select Interface to set
the USB option. Consult the following table when selecting
a USB option for connection to a computer (P.107). The de-
fault option is PTP.
OS
Camera Transfer d
(Transfer g)
PictureProject
Transfer button
USB option for transfer
Windows XP Home Edition
Windows XP Professional
Select Mass storage or PTP.
Windows 2000 Professional
Windows Millennium Edition (Me)
Windows 98 Second Edition (SE)
Select Mass storage.
Mac OS X (10.1.5 or later) Select PTP.
Select Mass stor-
age or PTP.
Notes on using Windows
If your computer’s operating system is Windows 2000 Professional, Windows Millen-
nium Edition (Me), or Windows 98 Second Edition (SE), select Mass storage for the
USB option for connecting the camera to a computer. If PTP is selected, disconnect
the camera as described below.
Windows 2000 Professional
A dialog will be displayed welcoming you to the Found New Hardware Wizard. Click Cancel
to close the dialog, and then disconnect the camera.
Windows Millennium Edition (Me)
After displaying a message stating that the hardware information database is being updated,
the computer will start the Add New Hardware Wizard. Click Cancel to exit the wizard, and
then disconnect the camera.
Windows 98 Second Edition (SE)
The Add New Hardware Wizard will be displayed. Click Cancel to exit the wizard, and then
disconnect the camera.
USB
Mass storage
PTP
OK