Nikon P3 - Manual (Page 120)

118
Wi
rel
e
ss Tran
sfer M
o
d
e
Information about Profile Configuration
Configuration of Profile Devices
Every computer that will connect to the camera must be configured as a profile device.
Maximum Number of Profile Devices
You can configure a maximum of nine profile devices (computers, printers connected to a comput-
er, the optional PD-10 wireless printer adapter) in the camera. If nine have already been configured
and you want to add a new one, delete an unneeded profile device using the Setup Utility (P.120).
Checking the Computer Wireless LAN Settings
Check the following items on the computer before starting the Setup Utility and configuring a pro-
file device. Refer to the manual and other reference materials for your computer and wireless LAN
devices.
Network Name (SSID) Enter the network ID for the computer.
Type
Select Camera to Computer (Ad-hoc) or Access Point
(Infrastructure). The camera and the computer must be set
to the same option.
Channel
Select the same channel (1 to 11) set in the computer (Cam-
era to Computer (Ad-hoc) only).
Authentication
Select Open, Shared or WPA-PSK (Access Point (Infra-
structure) only). Select the same method set in the com-
puter.
Security
Select None, WEP 64 bits, WEP 128 bits or TKIP (Access
Point (Infrastructure) only). Select the same method set in
the computer.
Security Key Format
When Security is set to WEP 64 bits or WEP 128 bits, select
the same method set in the computer (unnecessary when
Security is set to None).
Security Key
Enter the security key set in the computer (unnecessary when
Security is set to None).
Key Index
When Security is set to WEP 64 bits or WEP 128 bits, select
the same key index set in the computer (unnecessary when
Security is set to None). The default setting is 1.
Configure
Select Auto or Manual for the method of setting the camera
IP address.
IP Address
When Configure is set to Manual, enter the IP address for
the camera.