Nikon 5000 User Manual
Page 163
149
Camera Setup
White Balance
White balance can be set by pressing the
button and
rotating the command dial. While the button is pressed,
the W-B indicator will appear in the control panel and
the current white-balance setting will be displayed in the
shutter-speed/aperture display as follows: PrE (Preset
White Bal; select this option to restore the last record-
ed value for preset white balance), Sun (Fine), Inc (In-
candescent), Flu (Fluorescent), Clo (Cloudy), Fla
(Speedlight), no display (Auto).
Assigning Functions to the
Button: Func.
In User Sets 1, 2, and 3, you can choose the func-
tion assigned to the
button, making it possible
to select the User Set or adjust white balance and
metering without accessing the camera menus, or
to adjust flash and focus mode without using the
buttons on the back of the camera. The follow-
ing options are available:
Flash mode can be set by pressing the
button.
Focus mode can be set by pressing the
button.
User Setting
User Setting can be chosen by pressing the selected but-
ton and rotating the command dial. User Set number is
displayed in control panel shutter-speed/aperture display
while the
button is pressed.
Option
Description
Metering
Metering can be set by pressing the
button and
rotating the command dial.