Step 5—check the results – Nikon 5000 User Manual
Page 68
54
Tutorial—T
aking Photographs
Step 5—Check the Results
After each shot, the green lamp will blink as the
picture is recorded to the memory card. If the
monitor is on, the shot you have just taken will be
displayed briefly in the monitor. The following
operations can be performed while the photo-
graph is displayed:
During Recording
While photographs are recorded to the memory card, the green lamp will blink.
Do not eject the memory card, or remove or disconnect the power source until
the light has stopped blinking. Removing the card or cutting power in these
circumstances could result in loss of data or in damage to the camera or the
card.
To
Use
Description
Save
photo
Shutter
release
Press shutter-release button halfway to record photo-
graph and return to shooting mode.
Delete
photo
(
)
A confirmation dialog will be displayed. Press multi
selector up or down to highlight option, press to right
to select.
• Select No to save photo and
return to shooting mode
• Select Yes to delete photo
Pause
display
Display will be paused for twenty seconds. During this
time, you can press
to record photograph and
return to shooting mode, or press (
) to delete
photo as described above. Photograph will be record-
ed automatically if no operations are performed for
twenty seconds.