Nikon 5000 - Manual (Page 198)

184
Connections
Transferring More than 999 Images
No more than 999 images can be transferred using auto transfer. If a thou-
sand images or more are selected for transfer, no images will be transferred
automatically when the camera is connected to the computer. To transfer more
than 999 images, select the images to be transferred using Nikon View 4, or
use the Auto Transfer option to select 999 images or less, transfer these im-
ages, remove transfer marking using the Delete > Reset Transfer option in
the playback menu, mark a new batch of images for transfer, and repeat the
process until all images have been transferred.
Transfer Time
Note that when large numbers of images are selected, some time will be re-
quired for transfer.
“Hot Plug”
The USB interface supports “hot plug” connection of peripheral devices. This
means that the camera can be on or off when you connect it to the computer.
If the camera is off when connected, Nikon View 4 will not start until the cam-
era is turned on.
5 Begin transfer
Once the camera is connected and turned on, Nikon View 4 will automati-
cally detect the camera and the Image Transfer window will be displayed in
the computer monitor. If “All images” is displayed in the text box under
the Image transfer rule button, clicking the Transfer button will copy all
images on the memory card to the computer. To copy only the images se-
lected in Step 2, click Image transfer rule. A list of transfer options will
be displayed; select Transfer Marked images only and click OK to return
to the Image Transfer window. Confirm that
is displayed in the text box
under Image transfer rule and click the Transfer button to begin transfer.