Nikon D7000 User Manual

Page 301

Advertising
background image

281

n

Viewfinder
eyepiece
accessories

• DK-20C Eyepiece Correction Lenses: Lenses are available with diopters of –5, –4, –3, –2,

0, +0.5, +1, +2, and +3 m

–1

when the camera diopter adjustment control is in the

neutral position (–1 m

–1

). Use eyepiece correction lenses only if the desired

focus can not be achieved with the built in diopter adjustment control (–3 to
+1 m

–1

). Test eyepiece correction lenses before purchase to ensure that the

desired focus can be achieved. The rubber eyecup can not be used with
eyepiece correction lenses.

• Magnifying Eyepiece DK-21M: The DK-21M magnifies the view through the

viewfinder by approximately 1.17 × (50 mm f/1.4 lens at infinity; –1.0 m

–1

) for

greater precision when framing.

• Magnifier DG-2: The DG-2 magnifies the scene displayed in the center of the

viewfinder for greater precision during focusing. Eyepiece adapter required
(available separately).

• Eyepiece Adapter DK-22: The DK-22 is used when attaching the DG-2 magnifier.
• Right-Angle Viewing Attachment DR-6: The DR-6 attaches at a right angle to the

viewfinder eyepiece, allowing the image in the viewfinder to be viewed at right
angles to the lens (for example, from directly above when the camera is
horizontal).

Software

• Capture NX 2: A complete photo editing package offering such features as white

balance adjustment and color control points.

• Camera Control Pro 2: Control the camera remotely from a computer to record

movies and photographs and save photographs directly to the computer hard
disk.

Note

: Use the latest versions of Nikon software. Most Nikon software offers an auto

update feature when the computer is connected to the Internet. See the websites
listed on page xvii for the latest information on supported operating systems.

Body cap

BF-1B and BF-1A Body Caps

: The body cap keeps the mirror, viewfinder screen, and low-

pass filter free of dust when a lens is not in place.

Remote
controls

ML-L3 wireless remote control

: Use as a remote shutter release for self-portraits or to

prevent blur caused by camera shake. The ML-L3 uses a 3 V CR2025 battery.

Pressing the battery-chamber latch to the right (q), insert a fingernail into the gap
and open the battery chamber (w). Ensure that the battery is inserted in the
correct orientation (r).

Accessory
terminal
accessories

The D7000 is equipped with an accessory terminal for
MC-DC2 remote cords

(

0 73) and GP-1 GPS units (0 162), which

connect with the

4 mark on the connector aligned with

the

2 next to the accessory terminal (close the camera

connector cover when the terminal is not in use).

Advertising