Nikon D7000 - Manual (Page 70)

50
x
2
Choose a focus mode.
To choose an autofocus mode, rotate the focus-
mode selector to AF, and then press the AF-mode
button and rotate the main command dial until
the desired mode is displayed in the monitor.
To use manual focus, rotate the focus-mode selector to M and proceed to Step 6
after focusing as described on page 55.
3
Choose an AF-area mode.
To choose an AF-area mode, press the AF-mode
button and rotate the sub-command dial until
the desired mode is displayed in the monitor.
Mode Description
AF-S
Single-servo AF : For stationary subjects. Focus locks
when shutter-release button is pressed halfway.
AF-F
Full time-servo AF : For moving subjects. Camera
focuses continuously until shutter-release button
is pressed. Focus locks when shutter-release
button is pressed halfway.
Mode Description
!
Face-priority AF : The camera automatically detects
and focuses on portrait subjects facing the
camera. Use for portraits.
$
Wide-area AF : Use for hand-held shots of
landscapes and other non-portrait subjects. Use
the multi selector to select the focus point.
%
Normal-area AF : Use for pin-point focus on a
selected spot in the frame. A tripod is
recommended.
&
Subject-tracking AF : Track a selected subject as it
moves through the frame.
A
Live View AF and AF-Area Modes
The AF and AF-area modes for live view can also be
chosen using Custom Setting a8 (Live view/movie
AF;
0 211).
Focus-mode selector
AF-mode
button Main command dial
Monitor
AF-mode
button Sub-command dial
Monitor