Nikon S610 - S610c - Manual (Page 24)

Configuring the Camera’s Wireless Settings
18
4
Configure Network name (SSID) (
A 9),
Authentication (
A 9), and Encryption (A 9), and
click Next.
Enter the encryption key for the selected authentication
method in the Encryption key (
A 9) field and select a Key
index (
A 9) option.
• If Open System was selected for Authentication and WEP
was selected for Encryption, or Shared Key was selected for
Authentication, enter the encryption key in the Encryption
key field and select a Key index option.
• If WPA-PSK or WPA2-PSK was selected for Authentication, enter the encryption key in
the Encryption key field.
If Open System was selected for Authentication, and None was selected for Encryption,
make no other changes and click Next.
If Add Network Profile at Home Wireless LAN was selected in step 2, proceed to step 5. If
Add Network Profile at Public Wireless LAN was selected in step 2, proceed to step 6.
5
Choose Auto configuration or Manual
configuration, and click Next.
To acquire the IP address automatically, choose Auto. When
Next is clicked, the settings are applied and the network profile
is stored in the camera. Proceed to step 7.
To specify a fixed IP address, choose Manual, enter the
appropriate information in the IP Address, Subnet Mask,
Gateway, Primary DNS, and Secondary DNS (
A 10) fields,
and click Next to apply the settings. The network profile is
stored in the camera. Proceed to step 7.
6
Enter a Username and Password ( A 10) provided
by the wireless service provider to which you
subscribe (
A iv), and click Next.
The settings are applied and the network profile is stored in the
camera. Proceed to step 7.