Nikon S610 - S610c - Manual (Page 59)

Appendix
53
Troubleshooting
q P
Connection error.
Connection to the server
failed, or error occurred
during picture upload.
• Select Resume and press
the
k button to attempt
connection to the server
again.
• Choose Select SSID and
press the k button to select
SSID again.
49
q P
User information
incorrect. Camera is not certified to
connect to the wireless
network. Press the k button and select
SSID again. 49
q P
Server is full. my Picturetown server is
full. Delete unnecessary pictures
from the server.
–
q P
Service not available.
Cannot use
my Picturetown network
service. Press the k button and select
SSID again. 49
q P
Address incorrect.
An error occurred with
Picture Mail recipient
e-mail address. Be sure that you have specified
the recipient’s e-mail address
correctly.
34
q P
Login failed.
Login error occurred.
• Select Re-enter and press
the k button to configure
Email ID and password
again.
• Select Select SSID and
press the k button to select
SSID again.
28
49
Problem Cause/Solution A
The camera is not detected by the
my Picturetown Utility. Confirm your camera’s connection to the
computer.
15
SSID is not displayed.
• Configure a network profile.
• SSID is hidden.
• Signal strength may be poor.
- Be sure that your hand is not obstructing
the camera’s antenna.
- Change the camera’s direction.
- Move the camera closer to the access
point.
- Remove any obstacles between the
camera’s antenna and access point.
17, 28
10
Display Problem Solution A