Nikon S610 - S610c User Manual
Page 46
Configuring the Camera’s Wireless Settings
40
Configuring a Network Profile Using the PIN Method
1
Establish a cabled or wireless connection between the computer and access
point, and open the access point’s WPS configuration page on the computer.
For instructions on connecting the access point to a computer and displaying the
configuration pages, see the documentation provided with the wireless LAN access point.
2
Choose Network profile from the Wireless
settings option (
A 26) in the camera’s setup menu
and press the
k
button.
3
Choose PIN-code WPS and press the
k button.
An eight-digit PIN will be displayed.
4
Enter the PIN displayed in the camera’s monitor in the WPS configuration
page’s PIN field on the computer.
5
Press the
k button on the camera.
If the message, Configuration failed. is displayed, begin again
from step 2. If configuration fails repeatedly, configure the
network profile manually (
When setting up the wireless LAN features of the camera for the first time, next enter
the information required for my Picturetown user registration. See “b Entering my
Picturetown User Information” (
Wireless settings
Network profile
Sender
Address options
Picture Bank
Password
Configure manually
Push-button WPS
PIN-code WPS
Network profile
PIN: xxxxxxxx
Enter the above PIN into the
wireless router from a computer,
then press the OK button on the
camera.
Start
Done