Nikon S6300 User Manual
Page 69
51
Sh
oot
in
g
F
e
a
tures
Special Effects Mode (Applying Effects When Shooting)
Effects can be applied to images during shooting.
* The icon of the last effect selected is displayed. The default setting is D (soft).
The following six effects are available.
* The h HS 120 fps (640×480) setting in Movie Options (
A91) cannot be used with
this setting. If you try to use both settings at the same time, only the setting made first is
enabled.
• The camera focuses on the area in the center of the frame.
• When Selective color is selected, rotate the multi
selector or press
H or I to select the desired color
from the slider.
To change settings for any of the following
functions, first press the
k button to cancel color
selection, then change the settings as desired.
- Flash mode (
- Self-timer (
- Macro mode (
- Exposure compensation (
To return to the color selection screen, press the
k button again.
Enter shooting mode
M A (shooting mode) button M D (third icon from the top*) M
K M select an effect (A26-27)
Category
Description
D Soft*
(default setting)
Softens the image by adding a slight blur to the entire image.
E Nostalgic sepia*
Adds a sepia tone and reduces the contrast to simulate the qualities
of an old photograph.
F High-contrast
monochrome
Changes the image to black and white and gives it sharp contrast.
G High key
Gives the entire image a bright tone.
H Low key
Gives the entire image a dark tone.
I Selective color
Creates a black and white image in which only the specified color remains.
Selective color
Save
Save
Save
Slider