Nikon S6300 - Manual (Page 71)

53
Sh
oot
in
g
F
e
a
tures
Smart Portrait Mode (Capturing Images of Smiling Faces)
When the camera detects a smiling face, you can take a picture automatically
without pressing the shutter-release button (smile timer). You can use the skin
softening option to smooth the skin tones of human faces.
1
Without pressing the shutter-release button,
frame the picture and wait for the subject to
smile.
• When the camera detects a human face, a yellow
double border (focus area) is displayed around that
face. When the camera has focused on that face, the
double border will turn green for a moment and focus
is locked.
• Up to three faces can be detected. When the camera detects more than one face, a
double border is displayed around the face closest to the center of the frame, and
single borders are displayed around the other faces.
• If the camera detects that the face framed by the double border is smiling, the Smile
timer ( A56) feature is activated and the shutter is automatically released.
• After the camera releases the shutter, it will continue to detect faces and smiles, and
will release the shutter again if it detects a smiling face.
2
End shooting.
• Any one of the following operations can be used to cancel smile detection and stop
shooting.
- Turn the camera off.
- Set Smile timer (
A56) to Off.
- Press the A button and select a different shooting mode.
Enter shooting mode M A (shooting mode) button M F Smart portrait mode (A26-27)
F 3.2 F 3.2 1 / 2 5 0 1 / 2 5 0