Nikon Speedlite SB-800 - Manual (Page 105)

99
1 Set the camera’s exposure mode to Aperture-
Priority Auto (A) or Manual (M).
2 Set the camera’s metering system to Matrix
Metering Y or Center-Weighted Metering W.
3 Set the flash mode to TTL or Auto Aperture or
Non-TTL auto flash.
4 Set the camera’s aperture.
• Refer to page 100 for setting the aperture.
5 Adjust the flash head.
6 Make sure that the ready-light is on, then shoot.
• When the flash has fired at its maximum output and
underexposure may have occurred, the ready-light on
the SB-800 blinks for approx. 3 sec. To compensate,
use a wider aperture or move closer to the subject
and reshoot.
Adv
anced oper
ations