Nikon Speedlite SB-800 - Manual (Page 92)

■ ■ ■
Wireless multiple flash shooting in the A (auto) mode
1 Set the camera’s exposure mode to Aperture-
Priority Auto (A) or Manual (M).
2 Set up all Speedlights as the master and remote
flash units.
3 Set the wireless flash mode of all SB-800’s used
as master and remote flash units to “SU-4.”
4 Press the a button on the remote flash unit
to activate the A mode.
5 Set the flash mode of the master flash unit to the
D mode.
• With Nikon digital SLRs not compatible with CLS,
set the flash mode to Auto Aperture or Non-TTL
auto flash.
6 Confirm the aperture and flash shooting distance as
in normal TTL auto flash photography, then shoot.
• See page 17 for more information on the TTL auto
flash mode.
• See pages 38 and 40 concerning use of Auto
Aperture or Non-TTL auto flash with digital SLRs not
compatible with CLS.
• Flash operation can be confirmed by the ready-light
or the beeping sound (p. 89).
FLA
SH
REA
DY
86
SU-4 type wireless multiple flash shooting