Nikon Speedlite SB-800 - Manual (Page 81)

75
■ ■ ■
Using the Speedlight Stand
Use the provided Speedlight Stand AS-19 for stable placement of the remote
flash units.
• You can also use the stand for setting up your Nikon Speedlight when using it as a
remote flash unit in multiple flash shooting using cords (p. 90).
Attachment to the Speedlight Stand
1 Attach the SB-800 to the Speedlight Stand in the
same way that you attach it to the camera’s
accessory shoe. The same is true when
detaching it from the camera.
t To prevent the remote flash units from firing accidentally
Effective for the SU-4 type wireless multiple flash only
• Do not leave the power of the remote flash units on.
Otherwise, ambient electric noise due to a discharge of
static electricity, etc. may trigger them accidentally.
• If you are holding the remote flash unit in your hand, press
the Modeling illuminator button/Wireless remote flash cancel
button on the SB-800 to avoid accidental firing in sync with
other Speedlights. The SB-800 will not fire, while this button
is pressed.
FLA SH
REA D
Adv
anced oper
ations
Speedlight mounting shoe
(for all Speedlights except
the SB-15 and SB-27)
Speedlight mounting shoes
for the SB-15 and SB-27
Tripod socket Setup example using the SB-27