Nikon 4500 - Manual (Page 117)

107
Menu Guide—The Shooting Menu
Slide Copy Adapter: Inverse Color
The Inverse Color option requires a bright light source. If lighting is insuffi-
cient, the image in the monitor will be too bright. Should you notice exces-
sive “noise” in the form of randomly spaced bright pixels, set image sharpen-
ing to Off or Low (
105).
Inverse Color is intended for use only when examining film negatives in the
monitor, and the quality of the image produced will vary widely with the type
and make of film used. We recommend that you use a film scanner such as
the Nikon COOLSCAN to obtain high-quality digital images from negative film.
Swivel Limit
To prevent the lens section from rotating more than
90 ° forward, slide the swivel limit switch as shown
at right. This prevents unintended rotation when
a converter lens is attached.
Slide Copy Adapter
Selecting Slide Copy Adptr displays the menu
shown at right.
Option Description
Positive
Use when making photo-
graphs from color film.
Inverse Color
Use when examining film neg-
atives in the monitor.
Confirming the Lens Setting
At settings other than Normal, a converter lens
icon appears in the monitor.