Step 2—choose auto mode – Nikon 4500 User Manual
Page 29
19
Tutorial—T
aking Pictur
es
*Flash-ready and autofocus lamps next to viewfinder blink slowly when
battery is exhausted.
If the message “Out of memory” appears in the monitor, the memory
card is full. Delete pictures (
133), use a new memory card, or choose
a lower quality or image size (
101).
Step 2—Choose Auto Mode
The description in this section assumes that the camera is in
(auto) mode,
a “point-and-shoot” mode in which the majority of settings are controlled by
the camera.
The camera is set to
mode at shipment. If the
icon is not displayed in
the bottom left corner of the monitor when you turn the camera on, choose
mode as follows:
NO ICON
Display
Camera functions normally.
Camera status
As above, except that only
a limited number of shots
can be taken in “continu-
ous” mode (
96).
Battery fully charged.
Meaning
Low battery. Charge EN-
EL1 as soon as possible or
ready new 2CR5 (DL245)
battery.
Warning ! !
Battery
exhausted
*
Shutter release disabled.
Battery exhausted. Charge
EN-EL1 and reinsert, or use
new 2CR5 (DL245) battery.
Battery level is displayed as follows:
Press MODE
button and
rotate command dial un-
til
icon is displayed
+