Nikon S630 - Manual (Page 145)

133
Basic Camera Setup: The Setup Menu
S
h
ooti
n
g
, Pl
ay
ba
ck an
d S
e
tup
M
e
nus
h AF Assist
Enable or disable AF-assist illumination.
u Digital Zoom
Enable or disable digital zoom.
B
Notes on Digital Zoom
• When digital zoom is in effect, AF area mode is set to Center ( A110).
• Digital zoom cannot be used in the following situations.
- When Scene auto selector, Portrait or Night portrait is selected for scene mode
- When subject tracking mode is selected
- When smile mode is selected
- When Multi-shot 16 is selected for Continuous (
A105)
- Before movie recording begins (digital zoom of up to 2× can be applied while movies are being
recorded)
• When digital zoom is in effect, Metering is set to Center-weighted.
Press the
d button M z (Setup menu) (A122) M h AF assist
Auto (default setting)
AF-assist illumination will be used to assist the focus operation when the subject is
poorly lit. The illuminator has a range of about 3.5 m (approx. 11 ft.) at the maximum
wide-angle position and about 2.5 m (approx. 8 ft. 2 in.) at the maximum telephoto
position. However, note that for some scene modes, AF-assist illumination turns off
automatically (
A36 to 41) even if Auto is set.
Off
Disable this function. The camera may be unable to focus if lighting is poor.
Press the d button M z (Setup menu) (A122) M u Digital zoom
On (default setting)
When the camera is zoomed in to the maximum optical zoom position, rotating
and hold the zoom control at
g (i) triggers digital zoom (A25).
Off
Digital zoom will not be activated (except when shooting a movie).