Nikon S630 - Manual (Page 146)

134
Basic Camera Setup: The Setup Menu
S
h
ooti
n
g
, Pl
ay
ba
ck an
d S
e
tup
M
e
nus
i Sound Settings
Adjust the following sound settings.
k Auto Off
If no operations are performed for the selected length of time, the monitor will turn
off and the camera enters standby mode (
A17) to reduce drain on the batteries.
The power-on lamp blinks in standby mode. If no operations are performed for
another three minutes, the camera will turn off automatically.
Choose the time allowed to elapse before the camera enters standby mode if no
operations are performed from 30 s, 1 min (default setting), 5 min, and 30 min.
C
Canceling Standby Mode
Cancel standby mode and reactivate the monitor by pressing the buttons below.
• Power switch
• Shutter-release button
• A button
•
c button
C
Notes on Auto Off
Regardless of the option selected, the monitor will remain on as follows.
• When menus are displayed: three minutes
• Slideshow playback: maximum of 30 minutes
• AC adapter is connected: 30 minutes
Press the
d button M z (Setup menu) (A122) M i Sound settings
Button sound
Turn button sound On (default setting) or Off. A beep will sound once when
operations are completed successfully, twice when the camera acquires focus on
the subject, and three times when error is detected. Start-up sound will also play
when the camera is turned on.
Shutter sound
Choose shutter sound from On (default setting) or Off.
Press the d button M z (Setup menu) (A122)M k Auto off