Nikon S630 - Manual (Page 34)

22
B
a
sic Ph
ot
og
raph
y
an
d Pl
ay
back
:
A
u
to
M
o
de
Basic Photography and Playback : Auto Mode
Step 1 Turn the Camera On and Select A (Auto) Mode
This section describes how to take pictures in A (auto) mode, an automatic, “point-
and-shoot” mode recommended for first-time users of digital cameras.
1
Press the power switch to turn on the camera.
• The power-on lamp (green) will light for a moment and
the monitor will turn on. The lens will extend.
• Proceed to step 4 when A is displayed on the
monitor.
2
Press the A button.
3
Use the rotary multi selector to choose A and
press the
k button.
• The camera enters A (auto) mode.
4
Check the battery level and number of
exposures remaining in the monitor.
Battery Level
Number of Exposures Remaining
The number of exposures remaining will be displayed.
The number of pictures that can be stored depends on the remaining capacity of the
internal memory or memory card and the image mode setting (
A101).
Monitor Description
NO INDICATOR Battery fully charged.
B
Battery level low; prepare to charge or
replace the battery.
N
Battery
exhausted.
Cannot shoot. Recharge or replace
with a fully-charged battery.
Auto mode
15 15 15
Battery level indicator
Number of exposures
remaining