Nikon S1000pj - Manual (Page 157)

145
The Projector Settings Menu
U
sin
g th
e proje
ct
o
r
Power Saving
This option offers automatic adjustment of projection brightness to save power.
Auto Off
When the specified period of time passes with no operations performed in
projector mode, the camera ends projection and enters standby mode (
A 17) to
save power. Once the camera has entered standby mode, the power-on lamp will
blink, and if no operations are performed for another three minutes, the camera
will turn off. Choose the time allowed to elapse before standby mode is initiated
when no operations are performed in projector mode from 30
s, 1 min, 5 min
(default setting), and 30
min.
C
Canceling Standby Mode
• When the camera enters standby mode from projector mode, press the power switch, shutter-
release button or c button to activate playback mode.
• Press the A button to activate shooting mode.
• To resume projection, press the P button again in playback mode or shooting mode.
C
Notes on Auto Off
The time allowed to pass before the camera enters standby mode is fixed as follows:
• During slide show playback with the loop option enabled: 30 minutes
• When the projector menu or projector settings menu is displayed: three minutes
P button (projector mode) M d (Projector menu) M z (Projector settings menu) M
Power saving
On
Enable power saving mode. Projection may appear slightly darker than when
Off is
selected.
Off (default setting)
Power saving mode is disabled. When the battery is low, the camera automatically
adjusts projection brightness to save power even when
Off is selected.
P button (projector mode) M d (Projector menu) M z (Projector settings menu) M
Auto off