Nikon S1000pj - Manual (Page 173)

161
Troubleshooting
T
e
chni
cal N
o
te
s
Nikon Transfer does not start
when camera is connected. • Camera is off.
• Battery is exhausted.
• USB cable is not properly connected.
• Camera is not recognized by the computer.
• Computer is not set to start Nikon Transfer
automatically. For more information on Nikon
Transfer, refer to help information contained
in Nikon Transfer.
• Be sure that the computer meets Nikon
Transfer system requirements.
22
22
86
–
–
85
Pictures to be printed are not
displayed. Memory card contains no pictures. Replace the
memory card. Remove the memory card to print
pictures from the internal memory. 20
Cannot select paper size with
camera. Paper size cannot be selected from the camera if
the printer does not support the paper sizes
used by the camera, or the printer automatically
selects the paper size. Use the printer to select
paper size. 91, 92
Projected pictures are not
sharp. • Projector window is dirty.
• The camera is placed too far or too close to
the screen. Adjust the distance between the
camera and the screen.
• The picture is out of focus. Adjust the focus
with the projector focus slider.
151
137
138
Problem Cause/Solution
A