Nikon S1000pj - Manual (Page 50)

38
Shooting in Scene Mode
Sh
ooti
n
g
Su
ite
d
t
o
S
cen
es
* Default setting can be modified.
1
Fill flash with slow sync and red-eye reduction.
2
Default setting can be modified.
O: Use of a tripod is recommended in scene modes with which O is indicated. Set Vibration
reduction (A 126) to Off when using a tripod to stabilize the camera.
Q: Noise reduction is automatically performed in scene modes with which Q is indicated. More
time than usual is required to save pictures to which noise reduction is applied.
d Sports
Use this mode for dynamic action shots that freeze the action
in a single shot and record motion in a series of pictures.
• The camera focuses on the subject at the center of the frame
and focuses continuously until focus is locked by pressing
the shutter-release button halfway.
• While the shutter-release button is held down, up to 4
pictures are taken at a rate of about 0.9 frames per second
(fps) when
Image mode is set to I Normal (4000).
• Focus, exposure and white balance are fixed at the values determined with the first
picture in each series.
• AF-assist illuminator ( A 128) does not light.
• The maximum frame rate with continuous shooting may vary depending upon the
current image mode setting, the memory card used, or shooting condition.
m W n
Off
p
Off
o
0.0*
e Night portrait
Use this mode for portraits taken at sunset or at night. The flash
fires to light the portrait subject while preserving background
lighting to achieve a natural balance between the main subject
and background ambience.
• The camera recognizes and focuses on a human face. See
“Face Priority” ( A 108) for more information.
• If more than one face is recognized, focus will be on the face nearest to the camera.
• The camera softens skin tones (in up to three faces) by applying the skin softening
function before recording pictures ( A 50).
• If no faces are recognized, the camera focuses on the subject at the center of the screen
by pressing the shutter-release button halfway.
• Digital zoom is not available.
m V 1 n Off
2 p Off o 0.0
2
OQ