Nikon S1000pj - Manual (Page 35)

23
Step 1 Turn the Camera On and Select A (Auto) Mode
Bas
ic Ph
otography an
d Pl
ayba
ck
: A
u
to
Mod
e
Indicators Displayed in A (Auto) Mode
• The indicators and photo info displayed during shooting and playback will turn
off after a few seconds (
A 124).
• When the monitor has turned off in standby mode to save power, press the
power switch or the shutter-release button to reactivate it (
A 129).
D
Functions Available in A (Auto) Mode
In A (auto) mode, the flash mode ( A 30) can be selected, macro mode (A 33) and exposure
compensation ( A 34) can be applied and pictures can be taken using self-timer (A 32). Pressing
the d button in A (auto) mode to specify settings for all shooting menu items (A 98) according
to the shooting conditions.
D
Vibration Reduction and Motion Detection
• See
Vibration reduction (A 126) or Motion detection (A 127) in the setup menu (A 117)
for more information.
• Set
Vibration reduction to Off when using a tripod to stabilize the camera during shooting.
12 12 12
Shooting mode
A displayed in A
(auto) mode.
Image mode
The combination of image
size and image quality
(compression) is displayed.
The default setting is I
Normal (4,000 × 3,000).
Internal memory indicator
Indicates that images will be stored on the
camera’s internal memory (approximately 36 MB).
When a memory card is inserted in the camera,
C does not appear and images will be stored in
the memory card.
Motion detection icon
The effects of the subject
movement and camera shake
are reduced.
Vibration reduction icon
Vibration reduction can be
applied to reduce the effects
of camera shake.