Nikon P7100 - Manual (Page 200)

E74
The Setup Menu
Re
fere
nce
S
ect
io
n
Monitor Settings
B
Notes on Monitor Display Settings
• Only the framing grid is displayed in movie mode.
• In shooting modes E, F and N, Photo info in the setup menu settings cannot be set. Select
the E, F or N tab and set Photo info in the specialized menus for E, F and N (A13,
58).
Press the d button M z tab (A13) M Monitor settings
Option Description
Image review
On (default setting): Picture is displayed on the monitor immediately
after shooting and the monitor display returns to shooting screen.
Off: Picture is not displayed after shooting.
Zoom in on active focus point: Picture is displayed on the monitor
immediately after shooting and the monitor display returns to the
shooting screen. An enlarged image of the focused section is
displayed in the area where focusing is performed.
Tone level information: Tone level information (
A15) is
displayed on the monitor immediately after shooting.
Brightness
Choose from five settings to select the monitor brightness. The
default setting is
3.
Photo info
Choose the display options that are displayed on the monitor during
shooting. Separate display options (
A15) can be selected for when
the monitor display ( A8) is set to Show info and when it is set to
Hide info. In the default setting, all options are hidden.
X Virtual horizon: Display the virtual horizon for checking whether
the camera is horizontal. When the camera is horizontal or vertical,
the mark on the virtual horizon display turns green.
Y View/hide histograms: Display a graph that shows the
brightness distribution in the picture (
A8).
Z View/hide framing grid: Display a boxed guide for framing.
• To select show or hide, choose an option with the multi selector,
and then press the
k button to turn the check box on w or off.
• After finishing the setting, choose Confirm and press the k
button.
Virtual horizon
display Set the virtual horizon indicator to either Circle (default setting) or
Bars (
A8).