Nikon P7100 - Manual (Page 219)

E93
The Setup Menu
Re
fere
nce
S
ect
io
n
Eye-Fi Upload
B
Notes on Eye-Fi Cards
• Note that images will not be uploaded if signal strength is insufficient even if Enable is selected.
• Select Disable where wireless devices are prohibited.
• Refer to the instruction manual of your Eye-Fi card for more information. In the event of
malfunction, contact the card manufacturer.
• The camera can be used to turn Eye-Fi cards on and off, but may not support other Eye-Fi
functions.
• If the Eye-Fi card where Eye-Fi upload cannot be set to off is inserted, Eye-Fi upload cannot be set.
• The camera is not compatible with the endless memory function. When it is set on a computer,
disable the function. If the endless memory function is enabled, the number of pictures taken may
not be displayed correctly.
• Eye-Fi cards are for use only in the country of purchase. Observe all local laws concerning wireless
devices.
• Leaving the setting as Enable will result in the battery being depleted in a shorter period of time.
C
Eye-Fi communication indicator
The communication status of the Eye-Fi card in the camera can be confirmed on the monitor ( A8).
• w: Eye-Fi upload is set to Disable.
• x (lights): Eye-Fi upload enabled; waiting to begin upload.
• x (blinks): Eye-Fi upload enabled; uploading data.
• y: Eye-Fi upload enabled but no images available for upload.
• z: An error occurred. The camera cannot control the Eye-Fi card.
C
Supported Eye-Fi Cards
As of August 2011, the following Eye-Fi cards can be used. Be sure that Eye-Fi card firmware has
been updated to the latest version.
• Eye-Fi Connect X2 SDHC 4GB
• Eye-Fi
Mobile X2 SDHC 8GB
• Eye-Fi
Pro X2 SDHC 8GB
Press the d button M z tab (A13) M Eye-Fi upload
Option Description
Enable
Upload images created by the camera to a preselected
destination.
Disable (default
setting)
Images will not be uploaded.