Nikon P7100 - Manual (Page 215)

E89
The Setup Menu
Re
fere
nce
S
ect
io
n
Fn1 + Command Dial
Set the function to be performed when the command dial is rotated while pressing
the
w1 (FUNC1) button during shooting.
• Rotating either the main command dial or sub-command dial enables the
operation.
B
Note on Fn1 + Command Dial
Operation is disabled when AE or AF is locked (except when recording a movie).
Fn1 Guide Display
Press the d button M z tab (A13) M Fn1 + command dial
Option Description
Off (default setting) Shoot without the function. Operation will be disabled.
Manual focus ( E2)
When the focus mode is set to manual focus, the focus can be
adjusted.
Metering ( E44) Change the setting for metering.
Continuous ( E45) Change the settings for continuous shooting.
Flash exp. comp.
(
E52)
Change the setting for Flash exp. comp.
Active D-Lighting
(
E56)
Change the setting for Active D-Lighting.
Manual flash level
(
A62)
Change the flash output set for the built-in flash when the flash
mode is set to manual.
Press the d button M z tab (A13) M Fn1 guide display
Option Description
On (default setting)
The w1 button operation indicator (A8) and the functions
assigned to the Fn1 + shutter button ( E88) and Fn1 +
command dial ( E89) are displayed while the w1 (FUNC1)
button is pressed.
Off Even if the w1 button is pressed, guide is not displayed.