Axis Communications 231D+/232D+ - Manual (Page 25)

25 AXIS 231D+/232D+ - Live View Config
Sequence Mode
Sequence Mode is a configuration that automatically displays the view from multiple,
previously defined Preset Positions (see Dome Configuration, on page 28 and the online
help).
This is useful for e.g. security personnel viewing a surveillance system that constantly
rotates through the selected preset positions, in the listed order, or randomly.
To set up sequence mode, simply select the desired preset positions and enter the number
of seconds or minutes to display each position for. Each position can be displayed for up to
59 minutes.
Note:
The Sequence mode is only active as long the browser is open.
Pan Tilt Zoom Controls
The controls available for Pan Tilt Zoom (PTZ) are displayed on the Live View page by
default. The administrator can enable/disable the controls for specified users.
Source /
Preset positions
Tilt bar