Axis Communications 231D+/232D+ - Manual (Page 29)

29 AXIS 231D+/232D+ - Dome Configuration
Advanced
Limits
Define the pan, tilt, zoom and focus limits for the AXIS 231D+/232D+. Movements to the
left and right, up and down can be restricted to narrow the area under surveillance. The
near focus limit can be set to avoid focusing on objects too close to the camera.
Notes:
Once a limit has been saved, this position can not be exceeded by the AXIS 231D+/232D+ unless the val-
ues have been reset and saved to a greater value first (i.e. reset the default values of the mechanical restric-
tions).
Continuous zoom or focus movements may not always honour the limits.
Move speed sets the speed of the camera's Pan/Tilt movements. The default setting is
maximum speed.
Ctrl Panel
Use the Ctrl Panel to configure shortcut command buttons.
Calibration
The calibration page gives instructions for calibration of the AXIS 231D+/232D+.
Control Queue
The administrator can set up a queue for the PTZ controllers. Once set up, the PTZ Control
Queue buttons will appear on the Live View page offering one viewer exclusive control for
a limited amount of time. Other users will be placed in the queue. For an overview of Pan
Tilt Zoom controls, see page 25.
PTZ Control Queue on Live View page
Please use the online help files for more information.