Axis Communications 231D+/232D+ - Manual (Page 27)

27 AXIS 231D+/232D+ - Live View Config
Preset Positions
These presets are selected from the drop-down Source list on the Live View page and will
move and/or zoom the camera to a pre-defined position, i.e. to cover an area of particular
interest. Events can also be configured to go to preset positions when triggered. For
information on setting up preset positions, please see Dome Configuration, on page 28 and
the online help.
PTZ Control Queue
This indicates that PTZ queueing has been enabled. This means that the time the user is in
control of the PTZ device is limited and that a user queue has been set up. Use the buttons
to request or release control of the PTZ controls. For information on how to set up the
control queue, please see PTZ Control Queue on page 29 and the online help.
Using CGI links to control PTZ devices
User-defined CGI links on the Live View page can be used to issue HTTP API requests, e.g.
PTZ commands. These links are configured in the Live View Layout settings, see page 22.