Axis Communications 231D+/232D+ - Manual (Page 49)

49 AXIS 231D+/232D+ - System Options
Using the Control Button
Follow the instructions below to reset the AXIS 231D+/232D+ to factory default settings
using the Control Button.
1. Switch off the AXIS 231D+/232D+
by disconnecting the power.
2. Press and hold the Control button
while you reconnect the power.
3. Keep the Control button pressed
until the Power Indicator flashes
amber (this may take up to 15
seconds).
4. Release the Control button.
5. When the Power Indicator changes
to green (may take up to 1 minute), the process is complete and the AXIS
231D+/232D+ has been reset.
Control button
Network Indicator
Power Indicator