ROTHENBERGER Modul Pipe 25/16 - Manual (Page 30)

ENGLISH 28
2. Power the device ON, a splash screen saying “USB Connected” will appear on the LCD
screen - follow the appropriate prompts from your computer (platforms and / or versions
may vary)
3. You may also remove the SD Card memory storage device and load directly into your
computer - follow the appropriate prompts from your computer (platforms and / or versions
may vary).
10. How to update
Periodically check for the latest version of firmware on www.rothenberger.com.
Step 1 Copy folder DCIM on an empty SD card.
Step 2 Insert SD card and start the unit. Make sure that battery level is at least 50%.
Step 3
Do not press the power button when the “hour glass“ is
on the screen!
The firmware is updating (45 seconds).
Step 4
Firmware updated successfully, OK to turn power off and remove SD card.
11. Cleaning Instruction
1. Remove battery from unit.
2. Alcohol wipes, mild detergent and water to remove dirt and grease from the product.
3. Recommend soft optical cloth for cleaning the LCD window.
4. Recommend cotton cloth for cleaning imager head.
5. Allow appropriate drying time before re-inserting the battery and operating.
12. Storage
1. Unit should be cleaned prior to long term storage.
2. Store in a cool dry location.
3. Battery should be removed during storage to promote battery life.