A.J. Antunes & Co VCT-2000 9210214 - Manual (Page 2)

VERTICAL CONTACT TOASTER
2 P/N 1010874 Rev. I 04/14
General
The VCT-2000 Vertical Contact Toaster is designed for
contact toasting of buns. The toaster design allows the
operator to place buns on both sides of the heated platen
at the same time. Buns are placed into the top of the
toaster and uniform, golden brown, warm buns are then
retrieved at the base of the toaster.
This manual provides the safety, installation, and
operating procedures for the Vertical Contact Toaster
Model VCT-2000. We recommend that all information
contained in this manual be read prior to installing and
operating the unit.
Your Vertical Contact Toaster Model VCT-2000 is
manufactured from the finest materials available and
assembled to Roundup’s strict quality standards. This
unit has been tested at the factory to ensure depend-
able trouble-free operation.
OWNER INFORMATION
TABLE OF CONTENTS
IMPORTANT! Keep these instructions for future reference.
If the unit changes ownership, be sure this manual accompanies the equipment.
Warranty Information
Please read the full text of the Limited Warranty in this
manual.
If the unit arrives damaged, contact the carrier imme-
diately and file a damage claim with them. Save all
packing materials when filing a claim. Freight damage
claims are the responsibility of the purchaser and are
NOT covered under warranty.
The warranty does NOT extend to:
• Damages caused in shipment or damage as
result of improper use.
• Installation of electrical service.
• Normal maintenance as outlined in this manual.
• Malfunction resulting from improper maintenance.
• Damage caused by abuse or careless handling.
• Damage from moisture into electrical
components.
• Damage from tampering with, removal of, or
changing any preset control or safety device.
Owner Information .....................................................2
General ......................................................................2
Warranty Information .................................................2
Service/Technical Assistance ....................................3
Specifications .............................................................5
Electrical Specifications .............................................5
Dimensions ................................................................5
Installation ...................................................................6
Unpacking ..................................................................6
Equipment Setup .......................................................6
Assembling the Unit ..................................................6
Operation .....................................................................8
Operating Instructions ...............................................8
Temperature Adjustments ..........................................8
Hi-Limit Reset Button ..............................................10
Maintenance ..............................................................11
Daily Maintenance ...................................................11
Replacing the Black and Silver Release Sheet (Every
4–6 weeks) ..............................................................12
Replacing Belt Wraps (Every 3–6 months) .............12
Checking the Conveyor Belt Chains
(Every 3–6 Months) .................................................13
Replacing Roller Tensioners ....................................14
Troubleshooting .......................................................15
Replacement Parts ...................................................19
Wiring Diagram .........................................................25
Limited Warranty ......................................................28