AccuTemp ACCU-STEAM GAS GRIDDLE - Manual (Page 10)

AT2T-3238-1 Rev. C ACCU-STEAM GAS GRIDDLE OWNERS MANUAL Page 6/29
INSTALLATION (cont.)
Adequate means must be provided to limit the movement of the stand without
depending on the connector and the quick-disconnect device or its associated piping to
limit movement. The restraining device shall be mounted to the rear leg supports of
the stand.
IN-FIELD MODIFICATIONS
This griddle has a totally unique design and is constructed unlike any
other griddle on the market today. Any modification may permanently
damage the griddle and void the warranty.
ELECTRICAL SUPPLY
The A CCU -S TEAM griddle has been designed, manufactured and tested to meet
or exceed the demanding standards of safety set forth by Underwriters Laboratories,
Inc. To ensure that this high level of safety is maintained in your installation, it is
important that you read and understand the following information before attempting to
plug in your griddle.
WARNING
When the griddle is mounted on a stand with casters, the floor surface
must be level. If the floor is not level, the griddle and stand may become
unstable, such that tipping may occur, causing serious injury.
WARNING
Any in-field modification made without written authorization from
AccuTemp will void all warranties.
DANGER
Any in-field modifications that bypass the built-safety features of this
product will result in death or serious injury.