elektraLite CP16/24 - Manual (Page 23)

22
MIDI Memory Dump
The MIDI memory dump display reads:
PRESS GO TO SAVE
MEMORY VIA MIDI
Press "Go" to initiate a memory dump via the MIDI out port. This will encode and send a copy of the cue,
chase, macro and system parameter memory to a data storage device for backup or to another CP16/24. While
transmitting, "SENDING" will appear in the display. This takes several minutes. The MIDI memory dump
display will return when finished. Consult the MIDI chapter for more information.
Memory Lock
This feature is hidden from the other system programming features in order to better protect the memory. To
access memory lock press "Enter", "Cue", "998", "Enter".
The memory lock display reads:
MEMORY LOCK OFF
USE +/- TO SET
Use the "+" or "-" key to turn memory lock on or off. With memory lock on, the cue, chase and macro memory
will be protected from accidental writes from the front panel. If anyone tries to store a cue, chase or macro, the
message "MEMORY LOCKED" will appear in the display.
Erase Memory
This feature is also hidden from the other system programming features. To erase the memory press "Enter",
"Cue", "999", "Enter".
The erase memory display reads:
"DELETE" 5 TIMES
TO ERASE MEMORY
Press "Delete" 5 times to erase all cue, chase and macro memory as well as setting all system parameters to their
factory settings. Use this feature with caution.
Control Lock
The front panel controls including all switches, faders and joystick can be disabled to protect an installation
from any tampering. To disable the controls, power up the CP16/24 while holding the “Delete” switch, to re-
enable the controls, power up while holding the “Insert” switch.