elektraLite CP1 - Manual (Page 25)

Elektralite is a division of
Group One Limited
70 Sea Lane Farmingdale
New York 11735 USA
Telephone +1 516 249 3662
Facsimile +1 516 249 8870
Email [email protected]
Web www.MyElektralite.com
product manual
model nº c p 1
# E_10051a
In a policy of continuous improvement, Elektralite reserve the right to change features,
specifications and prices without notice.
Elektralite™ is a trade mark of Group One Limited
© Group One Limited, 2003
CP-1 SOFTWARE REVISION 1.2
The following features have been added to the CP-1.
Chase Speed
The chase speed selection has been updated to offer a wider variety of speeds from 0 (stopped) to 9§9 BPM. In
addition the Go button can be used to advance the chase by one step. This Is helpful when the chase Is stopped.
Macro Hold
Macro steps can now have a hold tlme_pf .25 seconds by entering 0 seconds as the hold time. This allows for quick
setups and focusing prior to a scene. For example, the lamps can be switched off and the mirrors refocused In .25
seconds followed by the lamps being switched back on. This will make spots flash on stage rather than glide from one
focus to the next.