Sequence mode – Axis Communications AXIS 223M User Manual
Page 30
30
AXIS 223M - Live View Config
Click the Add button to open the External Video Source Setup dialog, and make the
necessary settings. Enter the IP address or host name of the external video source you wish
to add. Depending on the external source, select either MPEG-2, MPEG-4 or Motion JPEG
as the type of video stream you want to receive.
Note:
Ensure that you have installed the correct decoders.
Example of a path to an external video source:
Sequence Mode
The Live View page can be configured to cycle through the internal and selected external
video sources, in order, or at random.
Select the desired video sources and enter the time in seconds to display each
source (up to 59 minutes). Click Save.
The Sequence buttons that appear on the Live View page are used to start and stop
the sequence mode.
Please see the online help
for more information.
http://192.168.0.125/axis-cgi/mjpeg/video.cgi