Axis Communications AXIS 223M - Manual (Page 35)

35 AXIS 223M - Event Configuration
Once configured, the motion detection windows appear in the list of available triggers, for
triggering events. See How to set up a triggered event above.
Note:
Using the motion detection feature may decrease the camera’s overall performance.
Configuring Motion Detection
1. Click Motion Detection in the Event Configuration menu.
2. Click the Configure Included Windows radio button and click New.
3. Enter a descriptive name under Window name.
4. Adjust the size (drag the bottom right-hand corner) and position (click on the text
at the top and drag to the desired position).
5. Adjust the Object size, History and Sensitivity profile sliders (see table below for
details). Any detected motion within an active window is then indicated by red
peaks in the Activity window (the active window has a red frame).
6. Click Save.
Object size, history and sensitivity:
To exclude parts of the Include window, click the Configure Excluded Windows button
and position the Exclude window as required, within the Include window.
Object Size History Sensitivity
High level Only very large objects
trigger motion detection An object that appears in the region will
trigger the motion detection for a long
period Ordinary colored objects on ordinary back-
grounds will trigger the motion detection
Low level Even very small objects
trigger motion detection An object that appears in the region will
trigger motion detection for only a very
short period Only very bright objects on a dark back-
ground will trigger motion detection