Axis Communications AXIS 223M - Manual (Page 45)

45 AXIS 223M - System Options
QoS (Quality of Service)
Quality of Service (QoS) provides the means to guarantee a certain level of a specified
resource to selected traffic on a network. Quality can be defined as a maintained level of
bandwidth, low latency, no packet losses, and so on. The main benefits of a QoS-aware
network can be summarized as:
• the ability to prioritize traffic and thus allow critical flows to be served before
flows with lesser priority.
• greater reliability in the network, thanks to the control of the amount of band-
width an application may use, and thus control over bandwidth races between
applications.
The QoS in Axis network video products marks the data packets for various types of
network traffic originating from the product. This makes it possible for network routers
and switches to reserve a fixed amount of bandwidth for these types of traffic, for example.
The following types of traffic are marked:
• live video
• live audio
• event/alarm traffic
• management network traffic
It is important to remember that to be able to use QoS, your network must be properly
configured. If you are unsure as to whether your network is QoS aware, please check with
your network administrator.
QoS
For each type of network traffic supported by your Axis network video product, enter a
DSCP (Differentiated Services Codepoint) value. This value is used to mark the traffic’s IP
header. When the marked traffic reaches a network router or switch, the DSCP value in the
IP header informs the router or switch of the type of treatment to apply to this type of
traffic, for example, how much bandwidth to reserve for it.
Note that DSCP values can be entered in decimal or hexadecimal form, but saved values
are always shown in decimal.
For more information on Quality of Service, please see the Axis support web at
www.axis.com/techsup
SMTP (email)
Enter the host names or addresses for your primary and secondary mail servers in the fields
provided, to enable the sending of event and error email messages from the camera to
predefined addresses via SMTP.