Sony ST-S3000ES - Manual (Page 12)

12 GB
Advanced Tuner Operations
Naming the Preset Stations
You can assign a name up to 5 characters long to each
preset station (except FM RDS stations). When the
station is tuned in, the station name will appear instead
of the frequency.
1 Use SHIFT and the TUNING/SELECT +or –
buttons to specify the preset where you want to
store the station name.
2
Press CHARACTER.
The cursor blinks in the display.
3
Press TUNING/SELECT + or – repeatedly to
select a character.
4
When the character you want appears, press
CHARACTER to move the cursor into position for
the next character.
If you make a mistake
Press CHARACTER repeatedly until the character you
want to change flashes (every time you press
CHARACTER, the next character flashes). Then press
TUNING/SELECT + or – to select a new character.
5
Repeat steps 2 and 3 until the station name you
desire appears in the display.
6
Press MEMORY.
“MEMORY” appears.
7
Press ENTER to store the station name.
To see the frequency of the displayed station name
Press DISPLAY repeatedly.
Organizing the Preset Stations
This tuner makes it easy to arrange preset stations in
the order you prefer. You can arrange all the preset
stations automatically, according to alphabetical order,
signal strength, country code, or tuner band, or you
can use the “Move” and “Erase” functions to move and
erase specific preset stations.
1
Press MENU.
2
Press TUNING/SELECT + or – repeatedly until
“Edit” appears in the display, then press ENTER.
If no stations have been stored as presets, “No
Preset” appears in the display.
3 Press TUNING/SELECT +/– repeatedly to
choose one of the following sorting methods:
4
Press ENTER.
The tuner sorts the stations, then returns to
normal tuning mode and receives preset station
A1 unless you choose “Move” or “Erase”.
Note
Some countries use the same country code, and the stations
from these counties may be arranged together.
Choose
Move
Erase
Alphabet
Strength
Country
Band
DISPLAY
CHARACTER TUNING/SELECT
To
change the location of a specific preset.
erase a specific preset.
sort preset stations in alphabetical order
according to their preset names.
Stations without preset names are arranged
by frequency, from low to high.
sort preset stations in order of their signal
strength (FM stations only).
MW and LW frequencies are arranged by
frequency.
sort FM RDS stations with PI information
alphabetically by country.
Other stations are arranged by frequency.
sort preset stations in order of their
frequency band (FM - MW - LW).
MEMORY
ENTER SHIFT
Note
The display returns to normal display mode if you do
not press ENTER within 8 seconds after pressing
MEMORY. If this happens, start again from the
beginning.
MENU
ENTER TUNING/SELECT