Sony ST-S3000ES - Manual (Page 6)

6 GB
Storing FM Stations
Automatically (Auto-betical
select)
With “Auto-betical select” you can automatically store
up to 30 FM and FM RDS stations in alphabetical order
without redundancy. Additionally, “Auto-betical
select” only stores the stations with the clearest signals.
If you want to store FM or AM (MW and LW) stations
one by one, see “Receiving broadcasts by scanning
stations (Automatic tuning)” on page 9 and “Presetting
Radio Stations” on page 11.
1 Connect FM aerial.
See “FM aerial hookups” on page 5.
2
Press POWER to turn on the tuner.
3
Press MENU repeatedly until “Auto-betical”
appears in the display.
4
Press ENTER.
“Yes” and “No” appear in the display.
5
Press TUNING/SELECT + or – to flash “Yes” in
the display.
6
Press ENTER.
The tuner scans and stores all the FM and FM
RDS stations in the broadcast area.
For RDS stations, the tuner first checks for
stations broadcasting the same programme, then
stores only the one with the clearest signal. The
selected RDS stations are sorted alphabetically by
their Programme Service name, then assigned a
two-character preset code. For more details on
RDS, see page14.
Regular FM stations are assigned two-character
preset codes and stored after the RDS stations.
To change the location of, or erase, a preset station
See “Organizing the Preset Stations” on page 12.
Notes
• If you move to another area, repeat this procedure to store
stations in your new area.
• For details on tuning stored stations, see page 11.
• The ANTENNA, ANT ATT, IF BAND , and FM MODE
settings are also stored along with the station.
• If you move the aerial after storing stations using "Auto-
betical select," the stored settings may no longer be valid.
If this happens, store the stations again.
Getting Started
Mains lead hookup
Connect the mains lead to a wall outlet after completing all
of the previous connections.
to a wall
outlet
/
Selecting the German Display
You can choose either an English or a German
language display. The factory preset language is
English. To change the display to German, follow the
steps below.
1
Press POWER to turn off the tuner.
2
While holding down the MENU button, press
POWER to turn on the tuner .
“Deutsch” appears in the display.
To return to the English display
Repeat this procedure.
“English” appears in the display.
POWER
MENU
POWER ENTER
AM
y
ANTENNA
75 COAXIAL
FM
R L
LINE OUT A B
MENU
TUNING/SELECT