Sony KDL-52Z5800 - Manual (Page 25)

25
GB
masterpage:Left
KDL-52/46/40Z5500
4-151-686-11(1)
Addi
tiona
l Inf
o
rmati
o
n
The TV turns off
automatically (the TV enters
standby mode).
• Check if the “Sleep Timer” is activated, or confirm the “Duration”
setting of “On Timer”.
• Check if the “Idle TV Standby” is activated.
• If no signal is received and no operation is performed in the TV mode
for 10 minutes, the TV automatically switches to standby mode.
The TV turns on
automatically.
• Check if the “On Timer” is activated.
Some input sources cannot be
selected.
• Select “AV Preset” and cancel the “Skip” setting for the input source.
The remote does not function. • Replace the batteries.
HDMI equipment does not
appear on “HDMI Device
List”.
• Check that your equipment is compatible with Control for HDMI.
You cannot select “Off” in
“Control for HDMI”.
• If you have connected any audio system that is compatible with Control
for HDMI, you cannot select “Off” in this menu. If you want to change
the audio output to the TV speaker, select “TV Speaker” in the
“Speaker” menu.
Not all channels are tuned for
cable.
• Check the support website for cable provide information.
http://support.sony-europe.com/TV/DVBC/
Condition Explanation/Solution
Copia de 010COV.book Page 25 Monday, September 28, 2009 10:48 AM