Additional information, Troubleshooting – Sony TDM-MP10 User Manual

Page 11

Advertising
background image

11

GB

Should you encounter a problem
with your unit, find your problem
in the troubleshooting checklist
below and take the indicated
corrective action. If the problem
persists, contact your Sony dealer.
Note that if service personnel
changes some parts during repair,
these parts may be retained.
When bringing the system in for
repairs, be sure to bring in the
entire system.
This product is a system product,
and the entire system is needed to
determine the location requiring
repair.

The remote does not function.

• Remove any obstacles.
• Point the remote at the AV

system (DAV series, etc.)’s
sensor.

• The distance between the

remote and the AV system is too
far.

• Replace the battery.
• Make sure the mobile phone* is

securely connected.

• Select the DMPORT function

on the AV system.

• Turn on and off the AV system.
• Start up the music player of the

mobile phone.

The mobile phone screen turns
off.

• The mobile phone backlight

automatically turns off after a
certain amount of time has
passed. To turn on the backlight,
press any button on the mobile
phone that is not related to
music playback operation.

Video/photo image from the
mobile phone does not appear on
the TV screen.

• The unit does not support video

output. Even if your mobile
phone has video/photo
capability, you cannot view
video or photo content on the
TV or other video devices.

There is no sound.

• Check the connections.
• Make sure the unit is securely

connected.

• Make sure the mobile phone* is

securely connected.

• Make sure the mobile phone* is

playing music.

• It may take time to start

playback depending on the
contents.

• Disconnect any Bluetooth

device (headset, etc.) that is
being used with the mobile
phone.

• Start up the music player of the

mobile phone.

There is severe hum or noise.

• Move the unit away from the

source of noise.

Additional Information

Troubleshooting

continued

Advertising